9 Best Electric Kettles with Temperature Control (2026)

The Narcissus P901 is a 0.9-liter gooseneck electric kettle with a 1200W base and 1°F temperature adjustment from 100°F to 212°F.

Pros

• +Fine 1°F increments across the 100°F to 212°F range
• +304 stainless steel interior for neutral-tasting water
• +Six-hour keep-warm mode for extended brewing sessions
• +Cordless body for carrying to the cup

Cons

• −0.9-liter capacity limits brewing to a few cups
• −Keep-warm only works below 205°F
• −Black is the only finish offered

The Narcissus P901 pairs a 0.9-liter body with a 1200-watt base the listing says boils a full pot in about five minutes. Temperature adjusts in 1°F steps from 100°F to 212°F, so dialing in a specific brew temperature is straightforward.

The 8mm gooseneck spout and 304 stainless steel interior are the details that matter for pour-over, since a narrow spout slows the flow and the steel interior keeps water tasting neutral. I'd consider this for a single brewer rather than a household filling a large pot.

Worth knowing, keep-warm only runs below 205°F, so it won't hold a rolling boil, and the fill empties fast when two want tea. Black is the only finish listed. I'd follow the manual for the anti-dry and auto shut-off protections.

A 0.9L gooseneck electric kettle with a stainless steel interior and a base that holds the set temperature to within 1°F.

Pros

• +Gooseneck spout for a controlled pour over stream
• +Stainless steel interior that keeps water tasting neutral
• +Temperature control within 1°F for repeatable brewing
• +Light 1.5 pound body that lifts easily when pouring

Cons

• −0.9L capacity runs short for large teapots or French presses
• −Black as the only color listed
• −No wattage figure given to gauge heating speed

The gooseneck spout is the defining piece. A thin, curved spout gives a slow, controlled stream for pour over coffee and loose leaf tea. The base holds the set temperature to within 1°F, so a chosen setting carries from brew to brew.

Inside, a stainless steel liner keeps the water path metal rather than coated, and 0.9L (30 oz) covers two or three cups before a refill. At 1.5 pounds, storage is easy.

Capacity is the trade-off, since 0.9L empties fast when filling a large teapot or French press. Black is the only listed finish, and I'd treat this as a fit for one or two pour over drinkers, used per the manufacturer's instructions.

A 1.8-liter glass electric kettle with a removable tea infuser and temperature presets from 160°F to 212°F on a cordless 360-degree swivel base.

Pros

• +Glass body shows water level without lifting the kettle
• +Temperature presets from 160°F to 212°F suit tea and coffee
• +Removable infuser steeps loose leaf tea for multiple cups
• +Automatic shutoff when water boils or runs dry

Cons

• −1.8-liter capacity overshoots for single-cup tea drinkers
• −No stated dishwasher-safe parts, hand washing expected
• −Single stainless steel color option limits matching other appliances

The 1.8-liter glass body is what shapes daily use here, since the water level stays visible without lifting the kettle. The removable tea infuser steeps loose leaf tea for a whole pot rather than one cup.

Temperature presets between 160°F and 212°F cover green tea through pour-over coffee, and tri-color LEDs show standby, heating, and keep warm at a glance. The cordless kettle lifts off its 360-degree base to carry to the table.

Worth knowing before you buy, the 1.8-liter capacity is generous for someone boiling a single mug, and no dishwasher-safe parts are stated, so expect hand washing. I'd consider this a sensible pick for households brewing tea for several people at once.

The Tisanio Gooseneck Electric Kettle is a 0.9L pour-over kettle with ±1°F temperature control, an LCD dual display, and a 304 stainless steel interior.

Pros

• +Gooseneck spout for a steady, controlled pour
• +±1°F adjustments plus five brew presets
• +304 stainless steel interior and inner lid
• +Auto shut-off and boil-dry protection

Cons

• −0.9L capacity covers only a few servings per boil
• −Keep-warm capped at two hours rather than indefinite
• −Black as the only listed color option

The 0.9L body and narrow gooseneck spout put this Tisanio kettle in pour-over territory, where a slow, steady stream over a cone dripper matters more than filling a stockpot. Temperature adjusts in 1°F steps from 104°F to 212°F, and the dual LCD shows set point beside current reading.

Two-stage heating is the detail I rate highest, since it eases off near the target instead of overshooting. Water contacts 304 stainless steel, including the inner lid, and there is a two-hour keep warm for back-to-back cups.

The trade-off is capacity, since 0.9L covers a few mugs rather than a full pot. I see this working best for a compact coffee station or a single brewer chasing repeatable pour-over.

The Cosori 1.7L electric kettle keeps water off plastic with 304 stainless steel and a glass body, plus six presets and a removable tea infuser.

Pros

• +Six presets from 165°F to boiling for tea and coffee
• +Stainless steel and glass water path with no plastic contact
• +Removable infuser lifts out to stop steeping quickly
• +60-minute keep-warm holds temperature without reboiling

Cons

• −Hard water leaves mineral deposits that need vinegar cleaning
• −Quoted 3-minute boil only covers 2 cups of water
• −Nearly 10-inch height needs clearance under upper cabinets

The 1.7L Cosori kettle keeps water against 304 stainless steel at the rim, inner lid and infuser, with a glass body in place of the usual plastic jug. I rate that detail as the one worth checking if you want the water path kept to metal and glass.

Six presets run from 165°F to boiling, which suits green, white and black teas, and 60-minute keep-warm holds the temperature without a second boil. The infuser lifts out whole to stop steeping.

Worth knowing before you buy, the quoted 3-minute boil covers 2 cups, so a full 1.7L pour takes longer, and no dishwasher-safe claim appears for the glass body. I see it suiting a household brewing several tea types.

The Cuisinart CPK-17P1 is a 1.7-liter stainless steel electric kettle with 1500 watts and six preset temperatures from 160°F to 200°F.

Pros

• +Six temperature presets spanning 160°F to 200°F
• +1.7-liter capacity covers several cups per boil
• +30-minute keep warm for a second round
• +360-degree cordless base simplifies pouring at the table

Cons

• −Wide 11.88-inch footprint takes up counter space
• −Listed 10.58-pound weight is heavy to lift
• −Stainless steel is the only color option listed

The CPK-17P1 pairs a 1.7-liter stainless steel body with 1500 watts, the spec that decides how fast a full pot comes to a boil. Six presets run from 160°F to 200°F, covering delicate leaves through black and herbal blends without a thermometer.

A 30-minute keep warm setting suits a household that works through cups over an hour, and the two-minute memory holds the cycle when the kettle lifts off the 360-degree base.

Counter space is the trade-off. At 11.88 inches wide it claims more room than a basic kettle, which matters on a cramped apartment counter. I rate this a sensible pick for preset-temperature tea brewing, and I would measure the counter first.

The Narcissus 1.8L electric kettle is a borosilicate glass kettle with a removable tea infuser and 1200W heating, adjustable in 5°F steps from 100°F to 212°F.

Pros

• +Adjustable 100°F to 212°F range in 5°F steps
• +Six-hour keep-warm hold at a chosen temperature
• +Removable stainless infuser for loose-leaf brewing
• +Mute option for the boil and keep-warm alerts

Cons

• −Six-hour hold excludes water heated to 212°F
• −3.48 pound glass body is heavier to lift and pour
• −No stated dishwasher-safe parts, so cleaning is hand work

The 1.8 liter borosilicate glass body with a removable 304 stainless steel infuser puts this Narcissus kettle in loose-leaf tea territory. Temperature runs from 100°F to 212°F in 5°F steps, and 1200W heats half a liter in roughly three minutes.

The six-hour hold is what I'd weigh most if tea sits on the counter through the morning, though it excludes water heated to 212°F. The 3.48 pound glass body is heavier to lift and pour than a plastic kettle.

I'd consider this for green, black, or herbal brewing where a set steep temperature matters and loose leaves go straight into the infuser. Cleaning stays hand work since no dishwasher-safe parts are stated.

A 1.7L electric kettle with six temperature presets, a 60-minute keep-warm mode, and 1500W of power for fast boiling.

Pros

• +Six one-touch presets take guesswork out of tea and coffee water
• +1500W element boils 1.7 liters in 3 to 7 minutes
• +60-minute keep warm holds temperature instead of reboiling
• +STRIX thermostat for consistent temperature control

Cons

• −LED lights show mode but not the actual water temperature
• −No stated dishwasher-safe parts, so cleaning is by hand

The six one-touch temperature presets are the reason to choose this over a plain switch kettle, since green tea and coffee want different water heat. A STRIX thermostat runs that control, and 1500W boils 1.7 liters in roughly 3 to 7 minutes.

The 60-minute keep warm mode is the feature I'd use most, holding water at the chosen setting instead of reboiling. Two LED indicators split the states, blue for heating and white for warming.

Worth knowing before you buy, the lights show the mode, not the water temperature. Descaling with vinegar and water is routine, and no dishwasher-safe parts are stated. I rate this a reasonable pick for a tea-drinking household that wants presets without a bulky appliance.

A 1.7L borosilicate glass electric kettle with 1500W power, five preset temperatures from 60°C to 100°C, a removable tea infuser, and a two-hour keep-warm mode.

Pros

• +Five color-coded LED presets simplify temperature selection
• +Removable infuser for loose-leaf tea in the same vessel
• +360° swivel base for cordless pouring at any angle
• +1.7L glass body handles several cups per boil

Cons

• −Keep-warm floor of 85°C sits above the 80°C green tea preset
• −No stated dishwasher-safe parts, so glass body needs hand washing
• −8 x 6 inch footprint taking up counter space

The five preset temperatures on this Aigostar kettle run from 60°C for delicate tea to 100°C for coffee, with an LED ring that changes color per setting. A removable infuser lets loose-leaf tea steep in the 1.7L glass body.

Boiling comes from a 1500W element, and keep-warm holds 85-100°C for up to two hours, handy for a second cup at a desk. Worth knowing, the keep-warm floor of 85°C sits above the 80°C green tea preset.

Cleaning is the trade-off. No parts are listed as dishwasher-safe, so the glass body and infuser get hand washed, and the counter footprint runs 8 by 6 inches. I rate it a sensible pick for tea drinkers wanting presets without a separate brewer.